Semax / Selank Spray
$109.00
A research blend of Semax and Selank supplied together in one bottle. Supplied as 20 mg total (10 mg Semax, 10 mg Selank) in an aqueous research solution in a sealed glass bottle with a pump closure, with a lot-matched Certificate of Analysis.
- Research use only Not for human or veterinary use
- Certificate per lot Published against the lot number
- Independently tested RP-HPLC with LC-MS identity
- Restricted sale 21+ qualified researchers only
Overview
This bottle combines two synthetic heptapeptides in one aqueous research solution: Semax, an ACTH(4-10) analogue, and Selank, a tuftsin analogue. The label split of 10 mg / 10 mg indicates 10 mg of each peptide.
Research context
Semax and Selank share a stabilising Pro-Gly-Pro extension but are studied in different neuroscience contexts, Semax in neurotrophic research and Selank in anxiety and stress models. The blend supports preclinical work comparing or combining these pathways.
Specifications
- Form: Aqueous research solution
- Quantity: 20 mg total (10 mg Semax, 10 mg Selank)
- Container: Glass bottle with pump closure, sealed
- Storage: 2 to 8 °C, upright and protected from light. Do not freeze
- Documentation: Lot-specific Certificate of Analysis (identity and purity by HPLC-MS), matched to the batch number on the label
For laboratory research use only. Not a drug, food, cosmetic or medical device. Not for human or animal use of any kind. No information on this page is medical advice or dosing guidance.
| Color Palette | Teal/Charcoal |
|---|---|
| Dosage | 10 mg / 10 mg |
Identity and chemistry
| Compound | Semax / Selank research blend |
|---|---|
| Component 1 | Semax: MEHFPGP; CAS 80714-61-0; C37H51N9O10S; 813.9 g/mol |
| Component 2 | Selank: TKPRPGP; CAS 129954-34-3; C33H57N11O9; 751.9 g/mol |
| Quantity per bottle | 20 mg total (10 mg Semax, 10 mg Selank) |
| Form | Aqueous research solution |
| Appearance | Clear, colorless solution |
| Purity specification | Lot-specific. The measured purity for each lot is reported on its Certificate of Analysis |
| Test methods | RP-HPLC for purity, mass spectrometry (LC-MS) for identity |
Molecular weights are average masses for the free peptide. The salt form and counter-ion content can vary between lots, so the Certificate of Analysis for your lot is the reference for identity and purity results.
What arrives with the order
- One sealed glass bottle with a pump closure per unit ordered, containing 20 mg total (10 mg Semax, 10 mg Selank) in an aqueous research solution
- A label showing the compound name, quantity and lot number
- A lot-specific Certificate of Analysis, available on this page and in the COA library
Identity and chemistry information for laboratory research use only.
On arrival
- Inspect: Check that the seal is intact and that the lot number on the label matches the Certificate of Analysis.
- Store: Move the sealed bottle to 2 to 8 °C as soon as it is received.
- Protect: Keep the bottle upright and away from direct light. Do not freeze.
Solution storage
Semax / Selank is supplied as 20 mg total (10 mg Semax, 10 mg Selank) in an aqueous research solution, in a sealed glass bottle with a pump closure. Peptides in solution are less stable than lyophilized material, so keep the bottle sealed at 2 to 8 °C, upright and protected from light, until it is needed. Short periods at ambient temperature in transit are tolerated.
After opening
Once the seal is broken, keep the bottle closed and refrigerated between uses, and record the opening date on the label. Use the material within the stability window set by your laboratory’s validated procedures, and do not return unused solution to the bottle.
Disposal
Dispose of unused material and contaminated consumables as laboratory chemical waste, in line with applicable federal, state and local rules.
Laboratory storage and handling information only. No dosing or administration guidance is given or implied.
What purity specification does this lot meet?
Every lot of Semax / Selank is tested for identity and purity by HPLC-MS before release. The measured purity for your lot is shown on its Certificate of Analysis, matched to the lot number printed on the bottle label.
Where do I find the Certificate of Analysis for my bottle?
Lot testing records appear on this product page. You can also search by compound name or lot number in the COA library.
What arrives with the order?
One sealed glass bottle with a pump closure per unit ordered, containing 20 mg total (10 mg Semax, 10 mg Selank) in an aqueous research solution. Each bottle is labeled with the compound name, quantity and lot number, so it can be matched to its Certificate of Analysis.
How should the bottle be stored when it arrives?
Move the sealed bottle to 2 to 8 °C, upright and protected from light, as soon as it is received. Do not freeze. The Storage and handling tab covers storage, opening and disposal.
Is Semax / Selank for human or veterinary use?
No. Semax / Selank is supplied strictly for in vitro laboratory research. It is not a drug, dietary supplement, food or cosmetic, has not been approved by the U.S. Food and Drug Administration, and must not be used in humans or animals. Sale is restricted to persons aged 21 or over who are qualified researchers or who buy on behalf of a research institution, laboratory or business.
Looking for something else?
Tell us the compound and quantity you are looking for and we will confirm availability and lead time. For research use only.
Contact Us
